|
Construction
Our fences are constructed and designed to meet all the demands fences bear in nature. Game Fencing is made of high tensile, high carbon steel with four times the strength of conventional low tensile wire. This wire is designed specifically for wildlife and is not made of what a domestic livestock fence is made of. Game fence wire has less than 1% elongation, compared to 11% elongation found in low tensile wire. Game fence wire exceeds Class III galvanization to assure three times the life over conventional hinge - joint fencing. When stock pressure, snow load, and the occasional tree falls on our fence, it will give with the load and will spring back to its original shape in most cases.
Animal impact loads are spread out and dissipated over
the fence height and width for complete animal
protection. The combination of the solid vertical stay
and the Hi-Tensile line wires allows this fence to be
constructed using 25' post centers, and 1320' between
braces. This provides a great savings to the producer in
post cost and labor. The deep crimp in the horizontal
wire maintains fence tension and allows the fence to
follow rough terrain.
This is the ultimate in fencing for all animals, large
or small, wild or domestic. Available in 330' rolls, and
up to a full 120" in height. With a high technology
approach achieving the highest quality, you're assured
the best overall performance and control for animal
containment, exclusion and protection for your animal
investments. Three major Hi-Tensile Game Fences
available on the market are Stay-Tuff, Tightlock, and
Solidlock, products which have proven to provide
superior performance. All of these are of the same basic
design, quality, and specifications. We can install any
one of these brands and do not recommend any other type
products for game fencing.
|
|
- S.S.G.F., Inc. builds fencing to meet all of your needs including
fencing for game preserves, airports, and for crop and tree protection.

- The factory recommends that every 1/4 mile braces
are to be constructed. Braces can be
constructed with galvanized industrial grade hardware or they can be welded. Procedures for constructing braces are very important due to the fact that braces are the backbone of any fence.

- Standard gates are constructed with galvanized 1 7/8" pipe frame
& 4 gauge 4" x 4" galvanized panels for longevity and strength.

- Custom gate designs by order for custom entrance ways.

- Water gaps are designed and constructed based on area and amount of water flow. Culvert pipe are recommended to access fence line with less maintance. Flaps can be installed on end of pipes constructed of panel, framed out metal, or conveyor belt.

- State of the art equipment is essential for proper installation of game fencing. Four wheel drive tractors with loaders, kinghitter pole drivers, special designed trailers for rolling out fence, metal stretcher boards, to 1 1/2 ton chain host and various rock drilling equipment.


|
|